MC228X1 1-Way Heating Controller

Select Country


To continue: Please select the country where you are delivering to.



MC228X1 1-Way Heating Controller US voltage / MC228X1

The MC228X1 1-Way Heating Controller operates up 1100W and can control one piece of laboratory equipment at a time, or an equivalent load, i.e. for a CMUV22/LX1 which has 3 elements, you can have an MC228X1 on each element. The MC228X1 Heating Controller has been designed to control the heating of resistive loads for bench top operation and is suitable for EM series Electromantles, the Electric Bunsen and Heating Cords and Tapes.

It  has 2 neon indicators: "Power On" white neon light and "Mantle/Bunsen Heater On" amber neon light, with a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the heating controller's amber neon light will pulsate to show that power is being supplied to the equipment being controlled, e.g. mantles, heating tape or cord. The pulse frequency will decrease as the regulator control knob setting is increased, and at maximum setting, the amber neon will be continually illuminated.

A rod support clamp is provided at the rear of the MC228X1 heating controller to take a standard 12.5mm (1/2") diameter rod, but is can also be wall-mounted or stand directly on the bench. It has a short mains lead with an IEC socket to connect it to the resistive load. An accessory extension mains lead is available where remote operation is required, e.g. in a fume extraction hood.

***Please note this is the 115V, 60Hz version for the US***


Quantity Spin UpSpin Down

Available soon
MC228X1 1-Way Heating Controller US voltage


Full product specification.move

Full product specification.

1-Way Heating Controller Part Code

MC228X1

Description

Single place percentage On/Off die-cast

Electrical requirements: 115V

115V, 50/ 60 Hz, 1100W

Controller power consumption

1W

Dimensions (d x w x h), mm

115 x 120 x 80

Weight, kg

0.82