Flame Photometer for Research Applications

Select Country

To continue: Please select the country where you are delivering to.

Research Flame Photometer (230V/50Hz) / 500801

• Designed for research applications
• Supplied with Na, K and Li filters
• Low temperature, single channel
• Flame failure safety system
• Operates with propane, butane, natural gas or LPG

The PFP7/C is a low temperature, single channel flame photometer that is specifically designed for use in clinical applications for the determination of sodium, potassium and lithium. The in-built lineariser circuitry of the PFP7/C enables readings of both sodium and potassium to be displayed directly in mmol/l.

The PFP7/C research flame photometer is supplied with Na, K and Li filters, connecting hoses and clips, compressor plug and drain trap (230V/50Hz)

***Please note this is the 230V, 50Hz version***

Quantity Spin UpSpin Down

Research Flame Photometer (230V/50Hz)

Full product specification.move

Full product specification.

Parameter PFP7/C
Range 120 to 160mmol/l Na, 0 to 10.0mmol/l K
Limits of detection Na 0.2ppm
K 0.2ppm
Li 0.25ppm
Reproducibility <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
Linearity < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
Stability < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5%
Recorder output Nominal 1.00V for a reading of 100.0
Electrical supply 90–125V or 190–250V @50/60Hz
Air supply Moisture and oil free, 6 litre/min @ 14psi
Fuel Propane, butane, natural gas or LPG
Size (w x d x h) 420 x 360 x 300mm
Weight 8kg