Jenways 4520 Bench Conductivity/TDS meter with UK power supply

Select Country


To continue: Please select the country where you are delivering to.



    4520 Bench Conductivity/TDS meter (UK) / 452001

    • Conductivity, resistivity, TDS and salinity modes
    • Special pure water mode for ultra low conductivity measurements
    • Storage of 500 results with built in data logger
    • Infra-red data link (IrDA) for connection to printer and RS232 link to connect to printer or PC via DataWay software

    The 4520 is a high specification laboratory conductivity /resistivity/TDS/salinity and temperature meter that offers additional accuracy with 1, 2 or 3 point conductivity calibration across the wide measurement range of 0 to 19.99S. The dedicated "pure water" mode ensures the optimum accuracy for this difficult application.

    * With cell constant (K)=10

    ***Please note this is supplied with a UK power supply***

    The 4520 conductivity meter is supplied with a glass conductivity probe with ATC (K=1) (027 013), electrode holder and UK power supply.




     


    Quantity Spin UpSpin Down

    Available soon
    4520 Bench Conductivity/TDS meter (UK)


    Full product specification.move

    Full product specification.

    Parameter 4520
    Conductivity range 6 auto–selected from 0 to 19.99S*
    Conductivity resolution 0.01µS to 0.01S
    Conductivity accuracy ±0.5% ±2 digits
    Automatic standard recognition 10µS, 84µS, 1413µS, 12.88mS
    Cell constant 0.010 to 19.999
    TDS range 6 auto selected ranges from 0 –1999g/l*
    TDS resolution 0.01mg/l to 1g/l
    TDS accuracy ±0.5% ±2 digits
    EC Ratio 0.50 to 0.80
    Resistivity range 0–20Mohm
    Resistivity resolution 0.01Mohm
    Resistivity accuracy ±0.5% ±2 digits
    Salinity range 0–99.9g/l
    Salinity resolution 0.1g/l
    Salinity accuracy 0–35 ±1g/l, 35–99.9 ±3g/l
    Temperature range –10 to 105°C
    Temperature resolution 0.1°C
    Temperature accuracy ±0.5°C
    ATC and manual 0 to 100°C
    Temperature coefficient 0.00% to 4.00%/°C
    Reference temperature 18, 20 or 25°C
    GLP Calibration reminder interval, alarm outputs and security code protected data
    Outputs Analogue, RS232 and IrDA interface
    Connector 7–pin DIN
    Power 9V AC ±10% @ 50/60Hz
    Size (l x w x d) 210 x 250 x 55mm
    Weight 850g